Product Name: Rapid prototyping of camera prototypes for electronic products
Industry/Classification: Consumer Electronics
Processing: SLA curing
Material: photosensitive resin
Process: 3D printing
Maximum Accuracy: 0.5mm Production Cycle Time: 3days
Product Size: 30mm*40mm
Post-processing: Sanding, Silver Spray Oil
3D printing in industrial design, product verification process is used very widely, which the SLA process is also one of the most used materials in 3D printing, it uses a variety of materials photosensitive resin, there are translucent, black, beige, white, etc., has formed a commonly used material family, in doing design samples will be often used. Different physical properties of the material can meet different product needs.
Today we introduce a case to illustrate the ability of SLA process in rapid prototyping to meet different needs, this case is an electronic product camera prototype. This case is an electronic product camera prototype. It is a combination of 3D printing SLA process to print translucent resin and ABS material + spray silver varnish finishing process to complete the case, first of all, to show the overall appearance of it:
It is divided into two parts: one part is the translucent resin material printed by 3D printing SLA process, and the other half is the non-transparent yellow part printed by Lasty-R. Both are all just printed using resin, which is fast and efficient.
It splits into two halves like this:
The semi-transparent half of the shell just needs to be printed out according to the process, and after sanding it is basically finished, while the second half of the child needs more post-processing to be ready.
The illustration shows the effect after the later sanding treatment and then after the oil spraying process, by spraying silver varnish can make this effect, from the illustration you can see that it has more air window parts, through the 3D printing can be very good and fast to make such an effect, to be more efficient than the traditional CNC, and the cost is far lower than the cnc processing.
The above is the introduction of this case.
